Register
Log In
Home
September 17, 2020
Offline
Hi all. I seem to be missing a bracket for my 66 D7. It supports the covers on either side of the battery and is held by rectifier bracket on the rear bumper.
I hope that makes sense, I have been looking at parts catalogues and scouring photos of bantams, but so far can only see bits of it in the corner of old photos.
If someone has one, then happy to cover postage and cost, if not the it looks like I'll be making something up to get the job done!!
Thanks for reading and ill try to get back to any responses as soon as possible!!
Andy
January 9, 2013
Offline
hi Andy its best to giv us a part number or have a look in your local hardwere shop and ajust wot you can find in ther
September 17, 2020
Offline
Hi
I have been looking for a part number, but cannot find anything.
Looks like I'm going to be making something up to fit. Shouldn't be to hard to do.
Thanks for the help
June 15, 2012
Offline
this ebay seller has one for a D14 one and says
“Please see other items for additional components ( D7 D10 Bracket) “
** Please log in to view **
D? - D10- D14 Bantams 350 AJS -500 Triumph http://bsanotru.....lfire.com/
June 13, 2015
Offline
Hi,
is this the one?
I can send measurements if you need them or send the bracket as a pattern?
regards
“There’s nothing new under the sun”.
November 6, 2016
Offline
I think the part number for the D7 / D10 is 90-9389. it is slightly different to the one above which I think is from a D14/B175.
I think that you could modify the one above to fit with a little heat and a bit of love on the anvil.
September 17, 2020
Offline
Hi Gents, Sorry for the late reply.
It looks like it is the 90-9389. Thanks for looking and letting me know.
There is one listed on e-bay, but I have managed to find a perfect piece of metal and was going to give it a go in making one, but have been called back into work. So it will have to wait till next week now.
If it doesn't go well or looks a bit rubbish then i'll go and buy the one of e-bay, but to be honest i quite fancy making my own now.
I'll let you know how i get on.
Andy
January 9, 2013
Offline
well done Andy if it fits its grate
November 6, 2016
Offline
Well said Sunny. I think that every classic bike should have at least one part on it that is 'owner made'. Essential chemistry if we want to feel a bond with our bikes.
If you need measurements then let me know..I have a D10 in bits on the bench at present and that part is readilly accessible.
Sponge
September 17, 2020
Offline
Well, a sllight change of plan. I found this on ebay and it was cheap enough so i bought it.
I still do have a couple of home made parts on the old bike, exhaust bracket being the latest, but that was due to me not ordering one in time and not being patient enough to wait!!
January 9, 2013
Offline
so the bracet in the photo above is for a pastoral modle and that s not usly going with a rectfier just to add a bit moor
have seven [ yes 7 ] part numbers in my little book for this this side panle bracket
Most Users Ever Online: 223
Currently Online:
12 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Top Posters:
cocorico: 3465
Cornish Rooster: 3109
bart: 2691
Blue Heeler: 2540
David Dale: 2346
Sprung Chicken: 2292
Piquet: 1975
Mags 1: 1853
sunny: 1807
jess steele: 1672
Newest Members:
Boneidle
Forum Stats:
Groups: 9
Forums: 48
Topics: 11261
Posts: 99724
Member Stats:
Guest Posters: 1433
Members: 3269
Moderators: 0
Admins: 3
Administrators: Bantam-Super, JMD, Stoo63
