February 24, 2015
So anybody who may race a bantam with a std type barrel.
After a rebore what cylinder to piston clearance would you aim for.
The new piston I bought recently gives a 3.5 inch thou clearance....I am wondering if you racing guys go tighter than this...not that I want to.
My Bantam video https://www.you.....jpOFmzRZRI
December 12, 2018
Hi bantammad ere as a matter of interest on piston fit 0.0015 per 1” of bore is ring fit The old yard stick, but with pistons that are available today not all Pistons supplies indicate or suggest there recommendations of running clearance due to the expansion rates are variable across piston manufacturers found that one out when l built a zeggar 500cc GP triple that was hitting around 126 bh back in the early 80s have fun Could be interesting happy days Les
Most Users Ever Online: 223
Currently Online: kiwi bantam, Blue Heeler, robbo
Currently Browsing this Page:
Cornish Rooster: 3314
Sprung Chicken: 2658
David Dale: 2485
Blue Heeler: 2393
Mags 1: 2356
Guest Posters: 1477
Administrators: Bantam-Super, JMD, Springs, Stoo63